<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://qetlab.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=MyrtlePorras</id>
	<title>QETLAB - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="https://qetlab.com/wiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=MyrtlePorras"/>
	<link rel="alternate" type="text/html" href="https://qetlab.com/Special:Contributions/MyrtlePorras"/>
	<updated>2026-11-17T07:06:41Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.45.3</generator>
	<entry>
		<id>https://qetlab.com/wiki/index.php?title=Sla_Flexible_Resin_Order_3d_Printer_Resin_Order&amp;diff=8819</id>
		<title>Sla Flexible Resin Order 3d Printer Resin Order</title>
		<link rel="alternate" type="text/html" href="https://qetlab.com/wiki/index.php?title=Sla_Flexible_Resin_Order_3d_Printer_Resin_Order&amp;diff=8819"/>
		<updated>2021-09-01T10:21:11Z</updated>

		<summary type="html">&lt;p&gt;MyrtlePorras: Created page with &amp;quot;[swears in German]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;It can be horribly frustrating if a 3D print&amp;lt;br&amp;gt;that has already been going on for hours or&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;even days fails and the printhead only moves&amp;lt;br&amp;gt;in...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[swears in German]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;It can be horribly frustrating if a 3D print&amp;lt;br&amp;gt;that has already been going on for hours or&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;even days fails and the printhead only moves&amp;lt;br&amp;gt;in mid-air without printing anything.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;In this video, I’ll show you how you can&amp;lt;br&amp;gt;easily resume one of these failed prints and&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;save you a lot of time and money!&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Let’s find out more!&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Guten Tag everybody, I’m Stefan and welcome&amp;lt;br&amp;gt;to CNC Kitchen.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Just a quick PSA before we start.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If you’re currently watching this because&amp;lt;br&amp;gt;this happened to you only minutes ago, make&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;sure you go back to your printer and keep&amp;lt;br&amp;gt;the bed heated so that your part doesn’t&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;release from it.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Oh, and on your way back, make sure that you’re&amp;lt;br&amp;gt;subscribed to the channel to not miss any&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;upcoming videos in the future.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;I’m quite sure that almost anyone who owns&amp;lt;br&amp;gt;a 3D printer already had a long print fail&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;at some point just because no material somehow&amp;lt;br&amp;gt;got extruded anymore.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;This is precisely what happened to me a bunch&amp;lt;br&amp;gt;of weeks ago while filming my filament recycling&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;video.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;I was easily able to continue mine with some&amp;lt;br&amp;gt;simple G-Code trickery and thought this is&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;actually an essential skill I’d like to&amp;lt;br&amp;gt;teach you.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Maybe even make a print fail on purpose and&amp;lt;br&amp;gt;try to recover it with these methods before&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;this happens with a precious 3-day print!&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Let me know in the comments if you ever recovered&amp;lt;br&amp;gt;a failed print and how you were able to do&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;it!&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;My print failed because I had a small piece&amp;lt;br&amp;gt;of metal in my recycled filament that at some&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;point blocked the nozzle.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;In your case, you could also run out of power,&amp;lt;br&amp;gt;encounter heat creep, have a knot in your&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;filament, or even run out of filament without&amp;lt;br&amp;gt;a material sensor.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;The highest priority is that you keep your&amp;lt;br&amp;gt;print attached to the print bed, and if you&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;have a removable print sheet, then also don’t&amp;lt;br&amp;gt;move it in any way because otherwise, we won’t&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;be able to resume the print at the correct&amp;lt;br&amp;gt;location.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If your model is already loose or you’re&amp;lt;br&amp;gt;not able to recover your print like I’ll&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;show you, there is still the possibility to&amp;lt;br&amp;gt;measure the height you were able to print,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;enter your slicer of choice, cut off as much&amp;lt;br&amp;gt;of the part as you’ve already printed, or&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;just move it in the z-direction by that amount.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Print the parts you’re still missing and&amp;lt;br&amp;gt;just glue everything together.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Done!&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If your part is still attached to the bed,&amp;lt;br&amp;gt;there is a good chance that you can recover&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;your 3D print with a bunch of [https://slashdot.org/index2.pl?fhfilter=simple%20steps simple steps].&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;First, remove all the zits and leftover material&amp;lt;br&amp;gt;on the layer that wasn’t correctly printed&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;anymore.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;We need a clean and even surface to start&amp;lt;br&amp;gt;with.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Next comes the most important step, and that’s&amp;lt;br&amp;gt;measuring the height of your part so we can&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;determine where we need to resume printing.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;I tend to use three methods for that.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If your part allows it and you have long enough&amp;lt;br&amp;gt;calipers, simply measure the height with them.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Make sure to measure perpendicular and all&amp;lt;br&amp;gt;the way down to the bed, so not only onto&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;the brim.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If you don’t have suitable calipers, you&amp;lt;br&amp;gt;can also try to use a ruler, which might be&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;precise enough for your purpose.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Make sure to measure more than one point on&amp;lt;br&amp;gt;your part to avoid measuring errors.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;On my sample, I measured 90.7 mm.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;Another very simple yet precise way is to&amp;lt;br&amp;gt;use the geometrical features of your print.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;For that, you need to open the G-code you&amp;lt;br&amp;gt;used for printing in a G-Code-Viewer.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;CURA and many other slicers allow you to do&amp;lt;br&amp;gt;that, though I tend to use the G-code Viewer&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;that comes with PrusaSlicer that also works&amp;lt;br&amp;gt;well with G-code from many other slicers.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;When my boat previously failed, it was easy&amp;lt;br&amp;gt;to spot because that was just when the bridging&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;section on the model started.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;On my latest print right here, it’s a little&amp;lt;br&amp;gt;more complicated because there are no hard&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;edges near where we failed, though there is&amp;lt;br&amp;gt;a distinct pattern of retractions and moves&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;only four layers before we stopped extruding.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;So the last layer that got printed was at&amp;lt;br&amp;gt;90.8 mm in height.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;The last method is great if you don’t have&amp;lt;br&amp;gt;any equipment to precisely measure the height&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;or no features on the print that you can use&amp;lt;br&amp;gt;to determine where it exactly failed.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;We’ll use the 3D printer as a makeshift&amp;lt;br&amp;gt;CMM or Coordinate-Measuring Machine.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;We’ll move the nozzle right to the point&amp;lt;br&amp;gt;where it touches the last layer and read the&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;height from the screen.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;For this, and  [https://ifun3d.evlla.com/product-category/3d-printer-resin/ IFUN Resin] in general, for resuming a print&amp;lt;br&amp;gt;to work, we need to re-home the printer because&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;we usually lose the absolute position once&amp;lt;br&amp;gt;we stop printing.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If your part is small and your printer usually&amp;lt;br&amp;gt;homes at the edge of the bed, it’s easy,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;and you can use the normal homing routine.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If it’s bigger, you need to make sure that&amp;lt;br&amp;gt;there is enough clearance to not crash into&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;the part.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;While you’re homing, if in doubt, always&amp;lt;br&amp;gt;have your finger on the power switch to potentially&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;kill it before it crashes into the print and&amp;lt;br&amp;gt;rips it from the platform.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;If you don’t find a way to home z, don’t&amp;lt;br&amp;gt;panic, there is still one last option I’ll&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;show you at the end.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;After homing, we make sure that the nozzle&amp;lt;br&amp;gt;is clean and then move the print head in small&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;steps to the part until the tip just touches&amp;lt;br&amp;gt;it.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;We can then read the height either from our&amp;lt;br&amp;gt;printers’ screen, or if there’s no display&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;we can send M114 to the controller&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;For my model, it was again 90.7 mm&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;All three methods were able to provide simila&amp;lt;br&amp;gt;&amp;gt;model heights down to 1/10 of a mm&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Which one you use is up to you&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Since I printed a layer height of 0.2 mm&amp;lt;br&amp;gt;&amp;gt;the closest next layer to the 90.7mm measurement&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;is layer 90.8, which is the same one we als&amp;lt;br&amp;gt;&amp;gt;got from looking at the G-Code-Viewer&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;This means that this was the last layer tha&amp;lt;br&amp;gt;&amp;gt;was at least partially printed&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Now we need to determine at which layer w&amp;lt;br&amp;gt;&amp;gt;want to continue&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Some might argue that we should reprint th&amp;lt;br&amp;gt;&amp;gt;last layer because it was probably not finishe&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;completely&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;In contrast to that, I tend to resume th&amp;lt;br&amp;gt;&amp;gt;print at the next layer because I want t&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;avoid a double extrusion where the materia&amp;lt;br&amp;gt;&amp;gt;gets all squished out, and the printhead migh&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;even get stuck&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Since perimeters usually get printed befor&amp;lt;br&amp;gt;&amp;gt;the infill, there is a good chance that w&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;won’t even notice a gap on the outside&amp;lt;br&amp;gt;&amp;gt;and a slight gap on the infill is usuall&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;not bad&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;I’ll therefore be resuming my printer a&amp;lt;br&amp;gt;&amp;gt;the height of 91 mm&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Now we need to slightly modify the G-cod&amp;lt;br&amp;gt;&amp;gt;file we initially printed&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Remove the SD card from your machine and ope&amp;lt;br&amp;gt;&amp;gt;the G-code file in your text editor of choice&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;This might look intimidating at first, bu&amp;lt;br&amp;gt;&amp;gt;G-code is really simple&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Each line represents an instruction that get&amp;lt;br&amp;gt;&amp;gt;processed one after the other&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;If you want to know what all the command&amp;lt;br&amp;gt;&amp;gt;do, simply check out the Marlin G-code referenc&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;I linked below&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;All the printing instructions up to somewher&amp;lt;br&amp;gt;&amp;gt;in layer 90.8 mm were already processed, an&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;we need to delete them&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;To do that, we need to find the section wher&amp;lt;br&amp;gt;&amp;gt;the layer at 91 mm starts to get printed&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Most slicers will add some comments when specifi&amp;lt;br&amp;gt;&amp;gt;things happen, such as a layer change&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Prusaslicer, for example, adds ;Z: and the&amp;lt;br&amp;gt;&amp;gt;the height&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;So we simply search for ;Z:91 and easily determin&amp;lt;br&amp;gt;&amp;gt;where the layer change starts&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;The following lines, in my case, are onl&amp;lt;br&amp;gt;&amp;gt;the preparation steps for the layer chang&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;that are irrelevant to us, so we search th&amp;lt;br&amp;gt;&amp;gt;line where the printhead is lifted up to tha&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;layer, which is done with the instructio&amp;lt;br&amp;gt;&amp;gt;G1 Z layer height&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;We mark everything by clicking in front o&amp;lt;br&amp;gt;&amp;gt;the instruction, then holding the shift ke&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;and scrolling all the way up to the last instructio&amp;lt;br&amp;gt;&amp;gt;before the print starts, which is usuall&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;homing with the instruction G28&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;The only things that should be left in ou&amp;lt;br&amp;gt;&amp;gt;G-code file are the initial setup and th&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;instruction for setting extruder and bed temperatur&amp;lt;br&amp;gt;&amp;gt;and homing&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Then we directly move the printhead to th&amp;lt;br&amp;gt;&amp;gt;layer at 91 mm and continue printing&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;The only command I add manually is M106 S25&amp;lt;br&amp;gt;&amp;gt;which turns the cooling fan on to 100%&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;If you’re not using a cooling fan or no&amp;lt;br&amp;gt;&amp;gt;the full power, adjust that value accordingly&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Now simply save everything back to the S&amp;lt;br&amp;gt;&amp;gt;card as a dot gcode file&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Make sure you fixed whatever caused your prin&amp;lt;br&amp;gt;&amp;gt;to fail in the first place and start the print&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;If everything goes well, the printer wil&amp;lt;br&amp;gt;&amp;gt;heat up, home, and continue printing jus&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;where it failed before&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;I’d still recommend having your finger o&amp;lt;br&amp;gt;&amp;gt;the power switch to stop the machine if anythin&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;looks strange to give you the possibilit&amp;lt;br&amp;gt;&amp;gt;to find out what you did wrong and have th&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;chance to give it another try&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;In my case, the point where I resumed printin&amp;lt;br&amp;gt;&amp;gt;is practically invisible, even though th&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;machine did nothing for several hours&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;What a great success&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;As I said before, there are cases where yo&amp;lt;br&amp;gt;&amp;gt;are not able to home the z-axis because you&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;print blocks the movement&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;In such a case, not everything is lost&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;You still need to measure or find the heigh&amp;lt;br&amp;gt;&amp;gt;where it failed in some way&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;When now editing the G-code file, make sur&amp;lt;br&amp;gt;&amp;gt;you also delete the G28 command, so the printe&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;doesn’t try to home because we will do tha&amp;lt;br&amp;gt;&amp;gt;manually&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Everything else stays the same&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Next, you manually need to move the printhea&amp;lt;br&amp;gt;&amp;gt;to the height of the last layer by connectin&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;your laptop and using Proterface, for example&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;If you’re running Octoprint or use the DUE&amp;lt;br&amp;gt;&amp;gt;web interface, that works excellent as well&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Many machines will not let you move the printhea&amp;lt;br&amp;gt;&amp;gt;if it’s not homed, so we need to trick th&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;controller&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;First home only X and Y by sending G28 X&amp;lt;br&amp;gt;&amp;gt;to the printer&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;The default position for the axes is ofte&amp;lt;br&amp;gt;&amp;gt;0, and many printers won’t let you go t&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;negative coordinates&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Send M211 S0 to disable the [http://www.automotivedigitalmarketing.com/main/search/search?q=software software] end stops&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Move the nozzle until it touches the las&amp;lt;br&amp;gt;&amp;gt;layer&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Now send G92 Z and the failure height yo&amp;lt;br&amp;gt;&amp;gt;measured&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;This way, you manually set the right z-heigh&amp;lt;br&amp;gt;&amp;gt;without homing&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Be quick with starting your edited G-cod&amp;lt;br&amp;gt;&amp;gt;file that the motors don’t switch to idl&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;and lose their position&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;After heating the bed and nozzle, the prin&amp;lt;br&amp;gt;&amp;gt;should continue normally, and you again migh&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;have saved days of printing and a ton of material&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Thanks for watching, everyone&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Please let me know in the comments if tha&amp;lt;br&amp;gt;&amp;gt;was helpful and straightforward&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;If you want to follow the guide in writte&amp;lt;br&amp;gt;&amp;gt;form, there is also my blog post linked dow&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;in the description&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;And if you want to support my work, conside&amp;lt;br&amp;gt;&amp;gt;becoming a Patron or YouTube member and chec&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;out the other videos in my library&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;I hope to see you in the next one&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;gt;Auf wiedersehen and goodbye!&lt;/div&gt;</summary>
		<author><name>MyrtlePorras</name></author>
	</entry>
	<entry>
		<id>https://qetlab.com/wiki/index.php?title=Sla_3d_Printer_Resin_Dlp_3d_Resin_Where_To_Buy&amp;diff=8346</id>
		<title>Sla 3d Printer Resin Dlp 3d Resin Where To Buy</title>
		<link rel="alternate" type="text/html" href="https://qetlab.com/wiki/index.php?title=Sla_3d_Printer_Resin_Dlp_3d_Resin_Where_To_Buy&amp;diff=8346"/>
		<updated>2021-09-01T05:38:36Z</updated>

		<summary type="html">&lt;p&gt;MyrtlePorras: Created page with &amp;quot;[Musik]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;[Bifald]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;[Musik]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;hej mit navn er michal grojiro, og vi&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;står her lige foran det&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;pragiske planetarium, som du vil se, vi&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;har m...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[Musik]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;[Bifald]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;[Musik]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;hej mit navn er michal grojiro, og vi&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;står her lige foran det&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;pragiske planetarium, som du vil se, vi&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;har masser af fantastiske legetøj her,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;der aldrig ville have eksisteret uden&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;hjælp til 3D -print, så her  Vi er ved siden&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;af månens modul adgangslem, men&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;før vi går ind, lad os tale lidt&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;om thrusterne,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;dette er pla -udskrifter, selvfølgelig&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;deformeres de lidt over tid, men deres&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;levetid er bestemt meget bedre, end&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;vi troede,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;da vi besluttede at placere&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;månemodulet  udenfor forsøgte vi at foregribe&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;de værste kilder til slid og&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;sol tåre vind eller hærværk&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;godt nu ved vi, at det er fugleskatter, der er&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;fascineret af materialerne,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;især aluminiumsfolien, de hakker i&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;modulet hele tiden og bruger&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;bitene til at bygge deres  kosmiske reder i&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;den omkringliggende park&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;velkommen til indersiden af&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;månemodulet,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;før jeg beskriver cockpittet lidt mere,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;jeg må sige, at jeg på en&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;måde må tvivle på den mentale sundhed hos&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;astronauter, der stort set meldte sig til at&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;blive skudt til månen i en lille metalkasse&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;godt&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;alligevel lad os tale om&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;kontrolpanelerne, der er en relativt mindre&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;mængde 3d -trykte dele på dem i&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;forhold til rumfærgen -cockpittet,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;da vi byggede det modul, vi stadig&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;lærte  hvad er 3D -print i stand til&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;ikke desto mindre har teknologien hjulpet os&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;meget, selv i dette tilfælde blev&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;flere trykte dele senere brugt til at&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;bygge den indbyggede computer&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;ved den måde, at denne computer er&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;bedstefar til moderne computere,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;jeg tror, det er den vigtigste&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;komponent og i min  ydmyg mening dens&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;præstation var den afgørende faktor for at&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;få besætningen til månen og sikkert tilbage&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;det sjove faktum er allerede i disse&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;banebrydende tider,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;der var en simpel&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;fejlfindingsanbefaling,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;hvis du ikke ved, hvad der er galt, prøv at&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;slukke og tænde det igen&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;der  er mange kontakter meget populær&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;blandt børn, så snart de kommer ind,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;kan du høre en non-stop højfrekvent&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;kliklydkontakt gal  e til at vare hele livet&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;har cirka to uger på hulrum her&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;og nu lad os gå ind og se&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;på den atlantiske rumfærge&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;[Musik]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;disse paneler er trykt som en sandwich&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;af et gennemsigtigt pla lag og hvidt pla&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;lag&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;det er malet gråt  og bogstaverne er&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;derefter maskingraveret i malingen,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;alt kommer til at være&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;semifunktionelt med kontakterne&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;tilsluttet arduinos og en&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;styrecomputer hele panelerne switchhovederne&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;og vagterne er alle [https://ifun3d.evlla.com/product-category/3d-printer-resin/ flexible 3d printer resin]-trykte, den grundlæggende&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;konstruktion er plast og træ i&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;det hele  stativ&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;og forlængerholdere er også 3D-trykte&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;[Musik]&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;lad os gå tættere på og se på thrusterventilerne&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;alt her kan laves med mere&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;gammeldags modelleringsmetoder, men disse&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;former er så specifikke, at 3D-print&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;er dybest set den eneste levedygtige mulighed, der&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;bøjer dem  fra metalplader eller&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;hvad det nu ville tage måneder og&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;sandsynligvis ende med et knap acceptabelt&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;resultat, så jeg tror, at denne del af&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;flykroppen er, hvor 3D [http://dict.leo.org/?search=-print%20spillede -print spillede]  dens&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;mest dominerende&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;rolle delene er ikke perfekte, men de ser&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;korrekt ud og passer godt sammen med resten&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;af konstruktionen&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;3d -print var også afgørende for&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;cockpitvinduets pakninger&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;i øjeblikket har vi fire originale&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;prusa 3d -printere her,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;vi har brugt dem til  flere år&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;og faktisk var vores første model en gammel&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;prusa -printer, så vidt jeg husker&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;uden mk -nummeret i sit navn med en&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;glasprintseng&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;i øjeblikket, vi udskriver&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;rumfærgen astronaut hjelme, som&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;vi er klar over, at dette&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;er  stort set som replikatoren&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;for mig er dette star trek science fiction&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;-teknologi, og jeg ville aldrig have&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;forestillet mig, at dette ville være muligt en dag,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;dette er en brændstoftank til en rumfærge&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;-model af betydelig størrelse,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;og det&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;er selve rumfærgen,&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;jeg blev lidt skør  med denne&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;opskalering af den originale model en anelse omkring det&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;dobbelte af&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;størrelsen, begynder efterbehandlingen og&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;samlingen at være vanskelig, men det er stadig&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;muligt at&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;se ud qu  ite majestætisk gør det ikke&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;dig&lt;/div&gt;</summary>
		<author><name>MyrtlePorras</name></author>
	</entry>
	<entry>
		<id>https://qetlab.com/wiki/index.php?title=User:MyrtlePorras&amp;diff=8345</id>
		<title>User:MyrtlePorras</title>
		<link rel="alternate" type="text/html" href="https://qetlab.com/wiki/index.php?title=User:MyrtlePorras&amp;diff=8345"/>
		<updated>2021-09-01T05:38:28Z</updated>

		<summary type="html">&lt;p&gt;MyrtlePorras: Created page with &amp;quot;I am Magnolia from Blumau. I am learning to play the Viola. Other hobbies are Motor sports.&amp;lt;br&amp;gt;405nm resin online shop abs like [https://ifun3d.evlla.com/product-category/3d-p...&amp;quot;&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;I am Magnolia from Blumau. I am learning to play the Viola. Other hobbies are Motor sports.&amp;lt;br&amp;gt;405nm resin online shop abs like [https://ifun3d.evlla.com/product-category/3d-printer-resin/ flexible 3d printer resin] buy online abs like resin for sale&lt;/div&gt;</summary>
		<author><name>MyrtlePorras</name></author>
	</entry>
</feed>