Sla Flexible Resin Order 3d Printer Resin Order

From QETLAB
Jump to navigation Jump to search

[swears in German]

It can be horribly frustrating if a 3D print
that has already been going on for hours or

even days fails and the printhead only moves
in mid-air without printing anything.

In this video, I’ll show you how you can
easily resume one of these failed prints and

save you a lot of time and money!

Let’s find out more!

Guten Tag everybody, I’m Stefan and welcome
to CNC Kitchen.

Just a quick PSA before we start.

If you’re currently watching this because
this happened to you only minutes ago, make

sure you go back to your printer and keep
the bed heated so that your part doesn’t

release from it.

Oh, and on your way back, make sure that you’re
subscribed to the channel to not miss any

upcoming videos in the future.

I’m quite sure that almost anyone who owns
a 3D printer already had a long print fail

at some point just because no material somehow
got extruded anymore.

This is precisely what happened to me a bunch
of weeks ago while filming my filament recycling

video.

I was easily able to continue mine with some
simple G-Code trickery and thought this is

actually an essential skill I’d like to
teach you.

Maybe even make a print fail on purpose and
try to recover it with these methods before

this happens with a precious 3-day print!

Let me know in the comments if you ever recovered
a failed print and how you were able to do

it!

My print failed because I had a small piece
of metal in my recycled filament that at some

point blocked the nozzle.

In your case, you could also run out of power,
encounter heat creep, have a knot in your

filament, or even run out of filament without
a material sensor.

The highest priority is that you keep your
print attached to the print bed, and if you

have a removable print sheet, then also don’t
move it in any way because otherwise, we won’t

be able to resume the print at the correct
location.

If your model is already loose or you’re
not able to recover your print like I’ll

show you, there is still the possibility to
measure the height you were able to print,

enter your slicer of choice, cut off as much
of the part as you’ve already printed, or

just move it in the z-direction by that amount.

Print the parts you’re still missing and
just glue everything together.

Done!

If your part is still attached to the bed,
there is a good chance that you can recover

your 3D print with a bunch of simple steps.

First, remove all the zits and leftover material
on the layer that wasn’t correctly printed

anymore.

We need a clean and even surface to start
with.

Next comes the most important step, and that’s
measuring the height of your part so we can

determine where we need to resume printing.

I tend to use three methods for that.

If your part allows it and you have long enough
calipers, simply measure the height with them.

Make sure to measure perpendicular and all
the way down to the bed, so not only onto

the brim.

If you don’t have suitable calipers, you
can also try to use a ruler, which might be

precise enough for your purpose.

Make sure to measure more than one point on
your part to avoid measuring errors.

On my sample, I measured 90.7 mm.

Another very simple yet precise way is to
use the geometrical features of your print.

For that, you need to open the G-code you
used for printing in a G-Code-Viewer.

CURA and many other slicers allow you to do
that, though I tend to use the G-code Viewer

that comes with PrusaSlicer that also works
well with G-code from many other slicers.

When my boat previously failed, it was easy
to spot because that was just when the bridging

section on the model started.

On my latest print right here, it’s a little
more complicated because there are no hard

edges near where we failed, though there is
a distinct pattern of retractions and moves

only four layers before we stopped extruding.

So the last layer that got printed was at
90.8 mm in height.

The last method is great if you don’t have
any equipment to precisely measure the height

or no features on the print that you can use
to determine where it exactly failed.

We’ll use the 3D printer as a makeshift
CMM or Coordinate-Measuring Machine.

We’ll move the nozzle right to the point
where it touches the last layer and read the

height from the screen.

For this, and IFUN Resin in general, for resuming a print
to work, we need to re-home the printer because

we usually lose the absolute position once
we stop printing.

If your part is small and your printer usually
homes at the edge of the bed, it’s easy,

and you can use the normal homing routine.

If it’s bigger, you need to make sure that
there is enough clearance to not crash into

the part.

While you’re homing, if in doubt, always
have your finger on the power switch to potentially

kill it before it crashes into the print and
rips it from the platform.

If you don’t find a way to home z, don’t
panic, there is still one last option I’ll

show you at the end.

After homing, we make sure that the nozzle
is clean and then move the print head in small

steps to the part until the tip just touches
it.

We can then read the height either from our
printers’ screen, or if there’s no display

>we can send M114 to the controller

>For my model, it was again 90.7 mm

>All three methods were able to provide simila
>model heights down to 1/10 of a mm

>Which one you use is up to you

>Since I printed a layer height of 0.2 mm
>the closest next layer to the 90.7mm measurement

>is layer 90.8, which is the same one we als
>got from looking at the G-Code-Viewer

>This means that this was the last layer tha
>was at least partially printed

>Now we need to determine at which layer w
>want to continue

>Some might argue that we should reprint th
>last layer because it was probably not finishe

>completely

>In contrast to that, I tend to resume th
>print at the next layer because I want t

>avoid a double extrusion where the materia
>gets all squished out, and the printhead migh

>even get stuck

>Since perimeters usually get printed befor
>the infill, there is a good chance that w

>won’t even notice a gap on the outside
>and a slight gap on the infill is usuall

>not bad

>I’ll therefore be resuming my printer a
>the height of 91 mm

>Now we need to slightly modify the G-cod
>file we initially printed

>Remove the SD card from your machine and ope
>the G-code file in your text editor of choice

>This might look intimidating at first, bu
>G-code is really simple

>Each line represents an instruction that get
>processed one after the other

>If you want to know what all the command
>do, simply check out the Marlin G-code referenc

>I linked below

>All the printing instructions up to somewher
>in layer 90.8 mm were already processed, an

>we need to delete them

>To do that, we need to find the section wher
>the layer at 91 mm starts to get printed

>Most slicers will add some comments when specifi
>things happen, such as a layer change

>Prusaslicer, for example, adds ;Z: and the
>the height

>So we simply search for ;Z:91 and easily determin
>where the layer change starts

>The following lines, in my case, are onl
>the preparation steps for the layer chang

>that are irrelevant to us, so we search th
>line where the printhead is lifted up to tha

>layer, which is done with the instructio
>G1 Z layer height

>We mark everything by clicking in front o
>the instruction, then holding the shift ke

>and scrolling all the way up to the last instructio
>before the print starts, which is usuall

>homing with the instruction G28

>The only things that should be left in ou
>G-code file are the initial setup and th

>instruction for setting extruder and bed temperatur
>and homing

>Then we directly move the printhead to th
>layer at 91 mm and continue printing

>The only command I add manually is M106 S25
>which turns the cooling fan on to 100%

>If you’re not using a cooling fan or no
>the full power, adjust that value accordingly

>Now simply save everything back to the S
>card as a dot gcode file

>Make sure you fixed whatever caused your prin
>to fail in the first place and start the print

>If everything goes well, the printer wil
>heat up, home, and continue printing jus

>where it failed before

>I’d still recommend having your finger o
>the power switch to stop the machine if anythin

>looks strange to give you the possibilit
>to find out what you did wrong and have th

>chance to give it another try

>In my case, the point where I resumed printin
>is practically invisible, even though th

>machine did nothing for several hours

>What a great success

>As I said before, there are cases where yo
>are not able to home the z-axis because you

>print blocks the movement

>In such a case, not everything is lost

>You still need to measure or find the heigh
>where it failed in some way

>When now editing the G-code file, make sur
>you also delete the G28 command, so the printe

>doesn’t try to home because we will do tha
>manually

>Everything else stays the same

>Next, you manually need to move the printhea
>to the height of the last layer by connectin

>your laptop and using Proterface, for example

>If you’re running Octoprint or use the DUE
>web interface, that works excellent as well

>Many machines will not let you move the printhea
>if it’s not homed, so we need to trick th

>controller

>First home only X and Y by sending G28 X
>to the printer

>The default position for the axes is ofte
>0, and many printers won’t let you go t

>negative coordinates

>Send M211 S0 to disable the software end stops

>Move the nozzle until it touches the las
>layer

>Now send G92 Z and the failure height yo
>measured

>This way, you manually set the right z-heigh
>without homing

>Be quick with starting your edited G-cod
>file that the motors don’t switch to idl

>and lose their position

>After heating the bed and nozzle, the prin
>should continue normally, and you again migh

>have saved days of printing and a ton of material

>Thanks for watching, everyone

>Please let me know in the comments if tha
>was helpful and straightforward

>If you want to follow the guide in writte
>form, there is also my blog post linked dow

>in the description

>And if you want to support my work, conside
>becoming a Patron or YouTube member and chec

>out the other videos in my library

>I hope to see you in the next one

>Auf wiedersehen and goodbye!